- 802.15.4 2.4GHz RF module for OEMs
- Point-to-multipoint network topology
- Firmware upgrades via UART / SPI or over the air
- Migrateable to DigiMesh®, Zigbee® PRO protocols
- Turn-key development via Digi Wireless Design Services
Description
Digi XBee® 802.15.4 series – Reliable RF connectivity for critical endpoints
The Digi XBee® 802.15.4 series redefines cost-effective, easy-to-install RF modules, enabling reliable wireless connectivity to devices and sensors. With a common footprint for multiple platforms, including multipoint and ZigBee/Mesh topologies as well as 2.4 GHz and 900 MHz solutions, Digi XBee® RF modules offer OEMs a flexible solution. Dynamic application requirements can be met with minimal development effort, reduced risk and faster time to market.
Robust performance for diverse applications
Digi XBee® 802.15.4 RF modules are ideal for applications with low latency and predictable communication timing. They enable fast, robust communication in a variety of configurations, be it point-to-point, peer-to-peer or multi-point/star configurations. Whether as a simple cable replacement for serial communication or as part of a complex hub-and-spoke sensor network, Digi XBee® 802.15.4 RF modules maximize performance and simplify development.
Discover the future of wireless connectivity with Digi XBee® 802.15.4 series – Cost-effective, Reliable, Powerful.
Specifications
| Digi XBee® S2C 802.15.4 | Digi XBee® 3 PRO S2C 802.15.4 | |
|---|---|---|
| PERFORMANCE | ||
| Transceiver chipset | Silicon Labs EM357 SoC | |
| Data rate | RF 250 Kbps, Serial up to 1 Mbps | |
| Indoor/urban range[1] | Up to 60 m (200 ft) | Up to 90 m (300 ft) |
| Outdoor/RF Line-Of-Sight range[1] | Up to 1200 m (4000 ft) | Up to 3200 m (2 miles) |
| Transmit power | 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode | 63 mW (+18 dBm) |
| Receiver sensitivity (1% PER) | -100 dBm / -102 dBm boost mode | -101 dBm |
| FEATURES | ||
| Serial data interface | UART, SPI | |
| Configuration method | API or AT commands, local or over-the-air (OTA) | |
| Frequency band | ISM 2.4 GHz | |
| Form factor | Through-Hole, Surface Mount | |
| Hardware | S2C | |
| ADC inputs | 4x 10-bit ADC inputs | |
| Digital I/O | 15 | |
| Antenna options | Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire SMT: RF Pad, PCB Antenna, or U.FL Connector |
|
| Operating temperature | -40º C to +85º C | |
| Dimensions (L x W x H) | Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm) SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) |
Through-Hole: 0.960 x 1.297 in (2.438 x 3.294 cm) SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) |
| NETWORKING AND SECURITY | ||
| Protocol | XBee 802.15.4 (Proprietary 802.15.4) | |
| Updatable to Digimesh-Protocol | Yes | |
| Updatable to Zigbee-Protocol | Yes | |
| Interference immunity | DSSS (Direct Sequence Spread Spectrum) | |
| Encryption | 128-bit AES | |
| Reliable packet delivery | Retries/Acknowledgements/Bestätigungen | |
| Filtration options | PAN ID, Channel, and 64-bit addresses | |
| Channels | 16 channels | 15 channels |
| POWER REQUIREMENTS | ||
| Supply voltage | 2.1 to 3.6V | 2.7 to 3.6V |
| Transmit current | 33 mA @ 3.3 VDC / 45 mA boost mode | 120 mA @ 3.3 VDC |
| Receive current | 28 mA @ 3.3 VDC / 31 mA boost mode | 31 mA @ 3.3 VDC |
| Power-down current | <1 μA @ 25º C | <1 μA @ 25º C |
| REGULATORY APPROVALS | ||
| FCC, IC (North America) | Yes | Yes |
| ETSI (Europe) | Yes | No |
| RCM (Australia and New Zealand) | No (coming soon) | No (coming soon) |
| Telec (Japan) | Yes | Yes |
Order information
| Order information | Digi XBee® S2C 802.15.4 series |
|---|---|
| KIT | |
| XKB2-A2T-WWC | Wireless Connectivity Kit with Digi XBee 802.15.4 (S2C) |
| MODULE | |
| XB24CAWIT-001 | XBee 802.15.4 through-hole module w/ wire antenna |
| XB24CAPIT-001 | XBee 802.15.4 through-hole module w/ PCB antenna |
| XB24CAUIT-001 | XBee 802.15.4 through-hole module w/ U.fl connector |
| XB24CASIT-001 | XBee 802.15.4 through-hole module w/ RPSMA connector |
| XB24CAPIS-001 | XBee 802.15.4 SMT module w/ PCB antenna |
| XB24CAUIS-001 | XBee 802.15.4 SMT module w/ U.fl connector |
| XB24CARIS-001 | XBee 802.15.4 SMT module w/ RF Pad connector |
| ANTENNAS | |
| A24-HABUF-P5I | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, U.FL female, articulating |
| A24-HASM-450 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating |
| A24-HASM-525 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating |
| DC-ANT-24DT | Antenna – Wi-Fi, table-top mount, 2450 Mhz, 0.5 m cable |
| DEVELOPMENT BOARDS | |
| 76000956 | Grove Connector Development Board – XBee, through-hole sockets |
| XBIB-C-SMT | Development board – XBee 3, USB-C, surface-mount socket |
| XBIB-CU-TH | Development board – XBee 3, USB-C, through-hole sockets |
| DIGI XBEE® MULTI PROGRAMMER | |
| XBEE-MP-SMT | Digi XBee Multi Programmer, surface mount (SMT) |
| XBEE-MP-TH | Digi XBee Multi Programmer, through-hole (TH) |
| XBEE-MP-SMT-PCB | Digi XBee Multi Programmer, surface mount (SMT) printed circuit board |
| XBEE-MP-TH-PCB | Digi XBee Multi Programmer, through-hole (TH) printed circuit board |
