- Cost-efficient 802.15.4 RF module
- Digi XBee® 3 micro form factor 13mm x 19mm
- Protocols: Zigbee, 802.15.4, DigiMesh® and BLE
- Configurable via Digi XCTU®
- IoT security with Digi TrustFence®
- Digi Part No.: XB3-24APT-J
Description
Digi XBee® 3 802.15.4 – PCB Ant – Innovative wireless communication on the PCB
The Digi XBee® 3 802.15.4 PCB Ant module, with an operating frequency of 2.4 GHz, sets new standards for wireless communication directly on the PCB. This module, with integrated PCB antenna (PCB Ant), offers a powerful and space-saving solution for a wide range of applications.
Features at a glance:
- Integrated PCB antenna: The XBee 3 802.15.4 PCB Ant module is equipped with an innovative integrated PCB antenna. This not only ensures reliable signal transmission, but also saves valuable space on the PCB, which is particularly advantageous in compact applications.
- Frequency diversity: With an operating frequency of 2.4 GHz, the module offers optimum range and reliability for wireless communication. This frequency is ideal for applications targeting this specific bandwidth.
- Digi XBee® 3 technology: The module uses the advanced Digi XBee 3 technology, which enables rapid integration of new functions using MicroPython and Digi XCTU®. This technology ensures flexible adaptation to individual requirements and application scenarios.
- Through-hole mounting (TH): The PCB Ant module is designed for uncomplicated through-hole mounting, which enables easy integration into existing circuits. This simplifies the development process and speeds up the implementation of wireless connectivity solutions.
The Digi XBee® 3 802.15.4 PCB Ant module offers innovative wireless communication directly on the board, optimized for performance and efficiency. Ideal for applications that require space-saving and reliable wireless connectivity.
Digi Part No.: XB3-24APT-J
Specifications
| Digi XBee® 3 802.15.4 | Digi XBee® 3 PRO 802.15.4 | |
|---|---|---|
| PERFORMANCE | ||
| Transceiver chipset | Silicon Labs EFR32MG SoC | |
| Date rate | RF 250 Kbps, serial up to 1 Mbps | |
| Indoor/urban range[1] | Up to 60 m (200 ft) | Up to 90 m (300 ft) |
| Outdoor/RF Line-Of-Sight range[1] | Up to 1200 m (4000 ft) | Up to 3200 m (2 miles) |
| Transmit power | +8 dBm | +19 dBm |
| Receiver sensitivity (1% PER) | -103 dBm normal mode | |
| BLUETOOTH® PERFORMANCE | ||
| Transceiver chipset | Silicon Labs EFR32MG SoC | |
| BLE version | Supports BLE 4.2 and capable of interoperating with BLE 5.0 devices that support 1M PHY. Hardware is software upgradable to 5.0, but not yet enabled except payload extensions (future release). | |
| Maximum data range | 1 Mbps | |
| Indoor/urban range[1] | Up to 15 m (49 ft) | |
| Outdoor/RF Line-Of-Sight range[1] | Up to 300 m (984 ft) | |
| Transmit power | +8 dBm | |
| Receiver sensitivity (1% PER) | -95 dBm normal mode | |
| FEATURES | ||
| Serial data interface | UART, SPI, I2C | |
| Configuration method | API or AT commands, local or over-the-air (OTA) | |
| Frequency band | ISM 2.4 GHz | |
| Form factor | Micro, through-hole, surface mount | |
| Interference immunity | DSSS (Direct Sequence Spread Spectrum) | |
| ADC inputs | 4x 10-bit ADC inputs | |
| Digital I/O | 15 | |
| Antenna options | Through-hole: PCB Antenna, U.FL Connector, RPSMA Connector SMT: RF Pad, PCB Antenna, U.FL Connector Micro: U.FL Antenna, RF Pad, Chip Antenna |
|
| Operating temperature | -40 ºC to 85 ºC (-40 ºF to 185 ºF) | |
| Dimensions (L x W x H) | Through-hole: 2.438 x 2.761 cm (0.960 x 1.087 in) SMT: 2.199 x. 3.4 x 0.305 cm (0.866 x 1.33 x 0.120 in) Micro: 13 x 19 x 2 mm (0.533 x 0.76 x 0.087 in) |
|
| PROGRAMMANILITY | ||
| Memory | 1 MB / 128 KB RAM | |
| CPU /clock speed | HCS08 / up to 50.33 MHz | |
| NETWORKING AND SECURITY | ||
| Protocol | 802.15.4 | |
| Encryption | 128/256 bit AES | |
| Reliable packet delivery | Retries/acknowledgements | |
| IDS | PAN ID and addresses, cluster IDs and endpoints (optional) | |
| Channels | 16 channels | |
| POWER REQUIREMENTS | ||
| Supply voltage | 2.1 to 3.6 V | |
| Transmit current | 135 mA @ 19 dBm | |
| Receive current | 15 mA | |
| Power-down current | 2 micro Amp at 25 ºC (77 ºF) | |
| REGULATORY APPROVALS[2] | ||
| FCC, IC (North America) | Yes | Yes |
| ETSI (Europe) | Yes | No |
| RCM (Australia) | Yes | Yes |
| Anatel (Brazil) | Yes | Yes |
| Teleck MIC (Japan) | Yes | No |
| KCC (South Korea) | Yes | Yes |
Order information
| Order information | Digi XBee® 3 802.15.4 series |
|---|---|
| MESH KIT | |
| XK3-Z8S-WZM | Digi XBee 3 Zigbee Mesh Kit, worldwide |
| MODULES | |
| XB3-24ARM-J | Digi XBee 3, 2.4 Ghz, 802.15.4, Micro, RF Pad Ant, MMT |
| XB3-24AUM-J | Digi XBee 3, 2,4 Ghz, 802.15.4, Micro, U.FL Ant, MMT |
| XB3-24ACM-J | Digi XBee 3, 2,4 Ghz, 802.15.4, Micro, Chip Ant, MMT |
| XB3-24AUS-J | Digi XBee 3, 2,4 Ghz, 802.15.4, U.FL Ant, SMTT |
| XB3-24APS-J | Digi XBee 3, 2,4 Ghz, 802.15.4, PCB Ant, SMT |
| XB3-24ARS-J | Digi XBee 3, 2.4 Ghz, 802.15.4, RF Pad Ant, SMT |
| XB3-24AUT-J | Digi XBee 3, 2,4 Ghz, 802.15.4, U.FL Ant, TH |
| XB3-24APT-J | Digi XBee 3, 2.4 Ghz, 802.15.4, PCB Ant, TH |
| XB3-24AST-J | Digi XBee 3, 2,4 Ghz, 802.15.4, RPSMA, TH |
| XB3-24ARM | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, Micro, RF Pad Ant, MMT |
| XB3-24AUM | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, Micro, U.FL Ant, MMT |
| XB3-24ACM | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, Micro, Chip Ant, MMT |
| XB3-24AUS | Digi XBee 3 PRO, 2,4 Ghz, 802.15.4, U.FL Ant, SMT |
| XB3-24APS | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, PCB Ant, SMT |
| XB3-24ARS | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, RF Pad Ant, SMT |
| XB3-24AUT | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, U.FL Ant, TH |
| XB3-24APT | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, PCB Ant, TH |
| XB3-24AST | Digi XBee 3 PRO, 2.4 Ghz, 802.15.4, SMA Ant, TH |
| ANTENNA | |
| A24-HABUF-P5I | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, U.FL female, articulating. |
| A24-HASM-450 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating. |
| A24-HASM-525 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating. |
| DC-ANT-24DT | Antenna – Wi-Fi, table-top mount, 2450 Mhz, 0.5 m cable |
| DEVELOPMENT BOARDS | |
| XBIB-C-MMT | Development board – XBee 3, USB-C, micro |
| DIGI XBEE® MULTI PROGRAMMER | |
| XBEE-MP-MCRO | Digi XBee Multi Programmer, micro form factor (MMT) |
| XBEE-MP-MCRO-PCB | Digi XBee Multi Programmer, micro form factor (MMT) printed circuit board |
| DIGI XBEE® 3 USB ADAPTER | |
| XU3-A11 | Digi XBee 3 USB Adapter – US, Canada and EMEA |
