- 802.15.4 2.4GHz RF module with wire antenna
- Point-to-multipoint network topology
- Firmware upgrades via UART / SPI or over the air
- Migrateable to DigiMesh®, Zigbee® PRO protocols
- Turnkey development via Digi Wireless Design Services
- Digi Part No.: XB24CAWIT-001
FEATURES
Get your inquiry
Product: Digi XBee® 802.15.4 TH module
SKU:
Request callback
Product: Digi XBee® 802.15.4 TH module
SKU:
Description
Digi XBee® 802.15.4 TH module – Cost-effective RF connectivity with wire antenna
The Digi XBee® 802.15.4 TH module, a through-hole module with wire antenna, sets a new standard for cost-effective RF connectivity. This module provides a reliable wireless connection to devices and sensors and is specifically designed to meet the needs of demanding applications.
Wireless performance with through-hole design
The Digi XBee® 802.15.4 TH module offers the following features:
- Cost-effective wireless RF communication without complex configuration
- Point-to-multipoint network topology for application flexibility
- Can be used worldwide thanks to the 2.4 GHz frequency
- Common XBee® footprint for easy integration into a wide range of RF modules
- Industry-leading quiescent current of less than 1uA for efficient operation
- Firmware upgrades via UART, SPI or over-the-air
- Migration capability to DigiMesh® and Zigbee® PRO protocols and vice versa
- Turnkey development services available from Digi WDS
The Digi XBee® 802.15.4 TH module is particularly suitable for applications that require low latency and predictable communication timing. Whether used as a simple cable replacement or as part of a broader hub-and-spoke sensor network, this through-hole module maximizes performance and ease of development.
Experience next generation wireless connectivity with the Digi XBee® 802.15.4 TH module – Cost effective, Reliable, With wire antenna.
Digi Part No.: XB24CAWIT-001
Specifications
Digi XBee® S2C 802.15.4 | Digi XBee® 3 PRO S2C 802.15.4 | |
---|---|---|
PERFORMANCE | ||
Transceiver chipset | Silicon Labs EM357 SoC | |
Data rate | RF 250 Kbps, Serial up to 1 Mbps | |
Indoor/urban range[1] | Up to 60 m (200 ft) | Up to 90 m (300 ft) |
Outdoor/RF Line-Of-Sight range[1] | Up to 1200 m (4000 ft) | Up to 3200 m (2 miles) |
Transmit power | 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode | 63 mW (+18 dBm) |
Receiver sensitivity (1% PER) | -100 dBm / -102 dBm boost mode | -101 dBm |
FEATURES | ||
Serial data interface | UART, SPI | |
Configuration method | API or AT commands, local or over-the-air (OTA) | |
Frequency band | ISM 2.4 GHz | |
Form factor | Through-Hole, Surface Mount | |
Hardware | S2C | |
ADC inputs | 4x 10-bit ADC inputs | |
Digital I/O | 15 | |
Antenna options | Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire SMT: RF Pad, PCB Antenna, or U.FL Connector |
|
Operating temperature | -40º C to +85º C | |
Dimensions (L x W x H) | Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm) SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) |
Through-Hole: 0.960 x 1.297 in (2.438 x 3.294 cm) SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) |
NETWORKING AND SECURITY | ||
Protocol | XBee 802.15.4 (Proprietary 802.15.4) | |
Updatable to Digimesh-Protocol | Yes | |
Updatable to Zigbee-Protocol | Yes | |
Interference immunity | DSSS (Direct Sequence Spread Spectrum) | |
Encryption | 128-bit AES | |
Reliable packet delivery | Retries/Acknowledgements/Bestätigungen | |
Filtration options | PAN ID, Channel, and 64-bit addresses | |
Channels | 16 channels | 15 channels |
POWER REQUIREMENTS | ||
Supply voltage | 2.1 to 3.6V | 2.7 to 3.6V |
Transmit current | 33 mA @ 3.3 VDC / 45 mA boost mode | 120 mA @ 3.3 VDC |
Receive current | 28 mA @ 3.3 VDC / 31 mA boost mode | 31 mA @ 3.3 VDC |
Power-down current | <1 μA @ 25º C | <1 μA @ 25º C |
REGULATORY APPROVALS | ||
FCC, IC (North America) | Yes | Yes |
ETSI (Europe) | Yes | No |
RCM (Australia and New Zealand) | No (coming soon) | No (coming soon) |
Telec (Japan) | Yes | Yes |
Documents
Order information
Order information | Digi XBee® S2C 802.15.4 series |
---|---|
KIT | |
XKB2-A2T-WWC | Wireless Connectivity Kit with Digi XBee 802.15.4 (S2C) |
MODULE | |
XB24CAWIT-001 | XBee 802.15.4 through-hole module w/ wire antenna |
XB24CAPIT-001 | XBee 802.15.4 through-hole module w/ PCB antenna |
XB24CAUIT-001 | XBee 802.15.4 through-hole module w/ U.fl connector |
XB24CASIT-001 | XBee 802.15.4 through-hole module w/ RPSMA connector |
XB24CAPIS-001 | XBee 802.15.4 SMT module w/ PCB antenna |
XB24CAUIS-001 | XBee 802.15.4 SMT module w/ U.fl connector |
XB24CARIS-001 | XBee 802.15.4 SMT module w/ RF Pad connector |
ANTENNAS | |
A24-HABUF-P5I | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, U.FL female, articulating |
A24-HASM-450 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating |
A24-HASM-525 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating |
DC-ANT-24DT | Antenna – Wi-Fi, table-top mount, 2450 Mhz, 0.5 m cable |
DEVELOPMENT BOARDS | |
76000956 | Grove Connector Development Board – XBee, through-hole sockets |
XBIB-C-SMT | Development board – XBee 3, USB-C, surface-mount socket |
XBIB-CU-TH | Development board – XBee 3, USB-C, through-hole sockets |
DIGI XBEE® MULTI PROGRAMMER | |
XBEE-MP-SMT | Digi XBee Multi Programmer, surface mount (SMT) |
XBEE-MP-TH | Digi XBee Multi Programmer, through-hole (TH) |
XBEE-MP-SMT-PCB | Digi XBee Multi Programmer, surface mount (SMT) printed circuit board |
XBEE-MP-TH-PCB | Digi XBee Multi Programmer, through-hole (TH) printed circuit board |
Customers were also interested in
-
Digi XBee® 802.15.4 series
- 802.15.4 2.4GHz RF module for OEMs
- Point-to-multipoint network topology
- Firmware upgrades via UART / SPI or over the air
- Migrateable to DigiMesh®, Zigbee® PRO protocols
- Turn-key development via Digi Wireless Design Services