- Low-power and low-profile RF module kit
- Digi XBee® 3 micro form factor 13mm x 19mm
- Protocols: Zigbee, 802.15.4, DigiMesh® and BLE
- Configurable via Digi XCTU®
- IoT security with Digi TrustFence®
- Digi Part No.: XK3-Z8S-WZM
Description
Digi XBee® 3 Zigbee Mesh Kit- Accelerate your wireless IoT projects
The Digi XBee® 3 Zigbee Mesh Kit is the ideal tool for developers looking to drive wireless IoT innovation. With comprehensive equipment and training materials, this kit provides everything you need for a successful start.
Included in the kit is:
- 3x Digi XBee® Grove development boards
- 3x Digi XBee 3 Zigbee SMT modules, programmable to 802.15.4 and DigiMesh
- 3x Micro-USB cable
- 3x antennas
- Comprehensive web and video-based teaching
With this kit, you not only receive the necessary hardware, but also comprehensive learning materials to quickly implement your wireless IoT projects. Start your journey into the world of wireless innovation with the Digi XBee 3 Zigbee Mesh Kit.
Digi Part No.: XK3-Z8S-
Specifications
| Digi XBee® 3 Zigbee 3.0 | Digi XBee® 3 PRO Zigbee 3.0 | |
|---|---|---|
| PERFORMANCE | ||
| Transceiver chipset | Silicon Labs EFR32MG SoC | |
| Date rate | RF 250 Kbps, serial up to 1 Mbps | |
| Indoor/urban range[1] | Up to 60 m (200 ft) | Up to 90 m (300 ft) |
| Outdoor/RF Line-Of-Sight range[1] | Up to 1200 m (4000 ft) | Up to 3200 m (2 miles) |
| Transmit power | +8 dBm | +19 dBm |
| Receiver sensitivity (1% PER) | -103 dBm normal mode | |
| BLUETOOTH® PERFORMANCE | ||
| Transceiver chipset | Silicon Labs EFR32MG SoC | |
| BLE version | Supports BLE 4.2 and capable of interoperating with BLE 5.0 devices that support 1M PHY. Hardware is software upgradable to 5.0, but not yet enabled except payload extensions (future release). | |
| Maximum data range | 1 Mbps | |
| Indoor/urban range[1] | Up to 15 m (49 ft) | |
| Outdoor/RF Line-Of-Sight range[1] | Up to 300 m (984 ft) | |
| Transmit power | +8 dBm | |
| Receiver sensitivity (1% PER) | -95 dBm normal mode | |
| FEATURES | ||
| Serial data interface | UART, SPI, I2C | |
| Configuration method | API or AT commands, local or over-the-air (OTA) | |
| Frequency band | ISM 2.4 GHz | |
| Form factor | Micro, through-hole, surface mount | |
| Interference immunity | DSSS (Direct Sequence Spread Spectrum) | |
| ADC inputs | 4x 10-bit ADC inputs | |
| Digital I/O | 15 | |
| Antenna options | Through-hole: PCB Antenna, U.FL Connector, RPSMA Connector SMT: RF Pad, PCB Antenna, or U.FL Connector Micro: U.FL Antenna, RF Pad, Chip Antenna |
|
| Operating temperature | -40 ºC to 85 ºC (-40 ºF to 185 ºF) | |
| Dimensions (L x W x H) | Through-Hole: 2.438 x 2.761 cm (0.960 x 1.087 in) SMT: 2.199 x 3.4 x 0.305 cm (0.866 x 1.33 x 0.120 in) Micro: 13 x 19 x 2 mm (0.533 x 0.76 x 0.087 in) |
|
| PROGRAMMANILITY | ||
| Memory | 1 MB / 128 KB RAM (32 KB are available for MicroPython) | |
| NETWORKING AND SECURITY | ||
| Protocol | Zigbee 3.0 | |
| Encryption | 128/256 bit AES | |
| Reliable packet delivery | Retries/acknowledgements | |
| IDS | PAN ID and addresses, cluster IDs and endpoints (optional) | |
| Channels | 16 channels | |
| POWER REQUIREMENTS | ||
| Supply voltage | 2.1 to 3.6 V | |
| Transmit current | 40 mA at 8 dBm | 140 mA at 19 dBm |
| Receive current | 17 mA | |
| Power-down current | 2 micro Amp at 25 ºC (77 ºF) | |
| REGULATORY APPROVALS[2] | ||
| FCC, IC (North America) | Yes | Yes |
| ETSI (Europe) | Yes | No |
| RCM (Australia) | Yes | Yes |
| Anatel (Brazil) | Yes | Yes |
| Teleck MIC (Japan) | Yes | No |
| KCC (South Korea) | Yes | No |
Order information
| Order information | Digi XBee® 3 Zigbee 3 series |
|---|---|
| MESH KIT | |
| XK3-Z8S-WZM | Digi XBee 3 Zigbee Mesh Kit, worldwide |
| MODULES | |
| XB3-24Z8RM-J | Digi XBee 3 Zigbee 3.0, 2.4 GHz, Micro, RF Pad Ant, MMT |
| XB3-24Z8UM-J | Digi XBee 3 Zigbee 3.0, 2.4 GHz, Micro, U.FL Ant, MMT |
| XB3-24Z8CM-J | Digi XBee 3 Zigbee 3.0, 2.4 GHz, Micro, Chip Ant, MMT |
| XB3-24Z8RM | Digi XBee 3 PRO Zigbee 3.0, 2.4 GHz, Micro, RF Pad Ant, MMT |
| XB3-24Z8UM | Digi XBee 3 PRO Zigbee 3.0, 2.4 GHz, Micro, U.FL Ant, MMT |
| XB3-24Z8CM | Digi XBee 3 PRO Zigbee 3.0, 2.4 GHz, Micro, Chip Ant, MMT |
| XB3-24Z8ST-J | Digi XBee 3, 2.4 Ghz Zigbee 3.0, RPSMA Ant, TH MT |
| XB3-24Z8UT-J | Digi XBee 3, 2.4 Ghz Zigbee 3.0, U.FL Ant, TH MT |
| XB3-24Z8PT-J | Digi XBee 3, 2.4 Ghz Zigbee 3.0, PCB Ant, TH MT |
| XB3-24Z8ST | Digi XBee 3 PRO, 2.4 Ghz Zigbee 3.0, RPSMA Ant, TH MT |
| XB3-24Z8UT | Digi XBee 3 PRO, 2.4 Ghz Zigbee 3.0, U.FL Ant, TH MT |
| XB3-24Z8PT | Digi XBee 3 PRO, 2.4 Ghz Zigbee 3.0, PCB Ant, TH MT |
| XB3-24Z8RS-J | Digi XBee 3, 2.4 Ghz Zigbee 3.0, RF Pad Ant, SMT |
| XB3-24Z8US-J | Digi XBee 3, 2.4 Ghz Zigbee 3.0, U.FL Ant, SMT |
| XB3-24Z8PS-J | Digi XBee 3, 2.4 Ghz Zigbee 3.0, PCB Ant, SMT |
| XB3-24Z8RS | Digi XBee 3 PRO, 2.4 Ghz Zigbee 3.0, RF Pad Ant, SMT |
| XB3-24Z8US | Digi XBee 3 PRO, 2.4 Ghz Zigbee 3.0, U.FL Ant, SMT |
| XB3-24Z8PS | Digi XBee 3 PRO, 2.4 Ghz Zigbee 3.0, PCB Ant, SMT |
| ANTENNA | |
| A24-HABUF-P5I | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, U.FL female, articulating |
| A24-HASM-450 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating |
| A24-HASM-525 | Antenna – 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA male, articulating |
| DC-ANT-24DT | Antenna – Wi-Fi, table-top mount, 2450 Mhz, 0.5 m cable |
| DEVELOPMENT BOARDS | |
| 76000956 | Grove Connector Development Board – XBee, through-hole sockets |
| XBIB-C-MMT | Development board – XBee 3, USB-C, micro |
| XBIB-C-SMT | Development board – XBee 3, USB-C, surface-mount socket |
| XBIB-CU-TH | Development board – XBee 3, USB-C, through-hole sockets |
| DIGI XBEE® MULTI PROGRAMMER | |
| XBEE-MP-MCRO | Digi XBee Multi Programmer, micro form factor (MMT) |
| XBEE-MP-SMT | Digi XBee Multi Programmer, surface mount (SMT) |
| XBEE-MP-TH | Digi XBee Multi Programmer, through-hole (TH) |
| XBEE-MP-MCRO-PCB | Digi XBee Multi Programmer, micro form factor (MMT) printed circuit board |
| XBEE-MP-SMT-PCB | Digi XBee Multi Programmer, surface mount (SMT) printed circuit board |
| XBEE-MP-TH-PCB | Digi XBee Multi Programmer, through-hole (TH) printed circuit board |
| DIGI XBEE® 3 USB ADAPTERS | |
| XU3-A11 | Digi XBee 3 USB Adapter – US, Canada and EMEA |
